EasyManuals Logo

Panasonic LUMIX DMC-ZS100 User Manual

Panasonic LUMIX DMC-ZS100
406 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #143 background imageLoading...
Page #143 background image
143
SQW0547
Picture Quality and coloring Settings
Using the picture correction functions effectively
Combining still pictures with different exposures ([HDR])
Recording mode:
The camera can combine 3 still pictures taken at different exposures into a single
properly exposed picture with rich gradation. The individual pictures used to create the
HDR picture are not saved. You can minimize the loss of gradations in bright areas and
dark areas when, for example, the contrast between the background and the subject is
large.
A combined HDR picture is saved in JPEG format.
[Rec] → [HDR]
[ON] Creates a combined HDR picture.
[OFF] Does not create a combined HDR picture.
[SET]
*
[Dynamic
Range]
[AUTO]: Takes pictures after automatically setting the adjustment range
of the exposure based on the contrast of a subject.
[±1EV] / [±2EV] / [±3EV]: Takes pictures using the adjustment range of
the exposure being set.
[Auto Align]
[ON]: Automatically adjusts the displacement of pictures caused by
jitter, etc. We recommend using this setting to take pictures with a
handheld camera.
[OFF]: Does not adjust the displacement of pictures. We recommend
using this setting when you use a tripod.
*
ZS100
After the shutter button has been pressed, do not move the camera during the burst operation.
Since a burst of still pictures are combined after they have been recorded, it will be a few
moments before you will be able to record another picture.
A subject that was in motion when it was recorded may be recorded as an afterimage.
ZS100
When [Auto Align] is set to [ON], the angle of view narrows slightly.
When you take pictures using a flash, the flash mode is fixed to [ ] (Forced Flash Off).
This function will not work for still pictures while motion pictures are being recorded.
This function is not available in the following cases:
When using [Burst]
When recording 4K photos
When using [Auto Bracket]
ZS100
During T (Time) recording
When recording using [Post Focus]
When [Quality] is set to [
], [ ] or [ ]
When using [Time Lapse Shot]
When [Auto Shooting] of [Stop Motion Animation] is set to [ON]

Table of Contents

Other manuals for Panasonic LUMIX DMC-ZS100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic LUMIX DMC-ZS100 and is the answer not in the manual?

Panasonic LUMIX DMC-ZS100 Specifications

General IconGeneral
Effective Pixels20.1 Megapixels
Optical Zoom10x
LensLEICA DC VARIO-ELMARIT
Screen Size3.0-inch
LCD Screen Resolution1, 040, 000 dots
Viewfinder Resolution1, 166, 000 dots
NFCNo
GPSNo
Built-in FlashYes
Sensor TypeMOS
Focal Length25-250mm (35mm equivalent)
Maximum ApertureF2.8-5.9
ISO Sensitivity125 - 12800 (extended to 80 - 25600)
Video Recording4K UHD (3840 x 2160) at 30p/24p
ViewfinderElectronic
Image Stabilization5-axis Hybrid O.I.S.
ConnectivityWi-Fi
BatteryLi-ion Battery Pack (7.2V, 1025mAh)
Battery LifeApprox. 300 shots
WeightApprox. 312g with battery and SD Memory Card (0.69 lb) / Approx. 267g without battery and SD Memory Card (0.59 lb)
Shutter Speed60 - 1/2000 sec (Mechanical Shutter), 1 - 1/16000 sec (Electronic Shutter)

Related product manuals