210
SQW0547
Functions for specific subjects and purposes
Saving a picture by selecting a focus point after
recording
[Post Focus]
Recording mode:
You can record bursts of photos with the same quality as a 4K photo while automatically
changing the focus point ([Post Focus] recording). After recording, you can select a point
on the screen to save a picture with that point as the focus point.
This function is best for non-moving subjects.
4K burst recording
with automatic focus
shift
Touch the desired focus
point
Finished picture has the
desired focus point
• To record pictures, use a UHS Speed Class 3 card. (→37)
• During recording, the angle of view will be narrower.
Recording using [Post Focus]
1
Press [ ] button
[Post Focus] icon
2
Press to select [ON] and press [MENU/SET]
• It can also be set by going to the [Rec] menu and selecting [ON]
for [Post Focus].
3
Determine the composition and press the shutter button halfway
• Auto Focus activates and automatically detects the focus point on the screen.
• If there is no focus point on the screen, the Focus indicator (
) blinks and you cannot record.
From halfway pressing the shutter button to completion of recording
• Do not change the distance to subject or the composition.
To Next Page
Loading...
