342
SQW0547
Wi-Fi
About connections
Connecting quickly with the same settings as used previously
([Select a destination from History] / [Select a destination from
Favorite])
The camera keeps a History of times you used the Wi-Fi function. You can register items
in the History to Favorite.
You can easily connect with the same settings as used previously by connecting from
History or Favorite.
• If the Wi-Fi settings of the device to connect to have been changed, it may not be
possible to connect to the device.
1
Set the menu
→ [Setup] → [Wi-Fi] → [Wi-Fi Function]
2
Select [Select a destination from History] or [Select a destination from Favorite]
Item Description
[Select a destination from History] Connects using the same settings as used previously.
[Select a destination from Favorite] Connects using settings registered in Favorite.
3
Select the desired connection setting
• If the device you want to connect to (smartphone, etc.) is connected to a wireless access point
other than the camera, you cannot connect the device to the camera using [Direct]. Change the
Wi-Fi settings of the device you want to connect to so that the access point to be used is set to
the camera.
You can also select [New Connection] and reconnect the devices. (→306)
Registering History items to Favorite
1
Set the menu
→ [Setup] → [Wi-Fi] → [Wi-Fi Function]
→ [Select a destination from History]
2
Select the item you wish to register and press
3
Enter a registration name
• For details on how to enter characters, refer to “Entering Text” (→87).
• Up to 30 characters can be entered. A double-byte character will be treated as two characters.
To Next Page
Loading...
