Panasonic LUMIX DMC-ZS100

259
SQW0547
Recording motion pictures
Recording pans with little vibration or recording motion pictures with zoom [4K Live Cropping]
4
Set the crop start frame
• When making settings for the first time, a crop start
frame of size 1920×1080 is displayed. (After setting
the crop start frame and end frame, the start frame
and end frame that you set immediately before will be
displayed.)
• The camera will remember the frame position and size
even when the camera is turned off.
SetSet
SizeSize
ResetReset
StartStart
Operation Touch operation Description
Touch Moves the frame
ZS100
Pinch out /
Pinch in
Enlarges/reduces the frame
(The range of settings allowed is from 1920×1080 to
3840×2160.)
ZS60
[DISP.] [Reset]
The frame will return to the size of 1920×1080, with the
position of the frame as its center.
[MENU/SET] [Set] Decides the position and size of the frame
5
Set the crop end frame
• Do the same as in step
4
to set the end frame position
and size,
*
1
making it coincide with the movement in
the image you wish to record (see below).
*
1
Press [DISP.] or touch [Reset] to return to the start frame
position and size.
Movement of the image
on the screen
Frame size
Start frame End frame
Pan (move right and left) Same
Zoom in Large Small
Zoom out Small Large
• The setting of [AF Mode] switches to [ ] (Face/Eye
Detection).
*
2
If a face is detected in the crop start
frame, a yellow or white AF area frame is displayed.
*
2
The Eye Detection cannot be used. If no face is recognized,
the camera switches to [
] (49-area-focusing) (→150).
■
Changing the position and size of a crop frame
Press [Fn1] button.
ResetReset
EndEnd
SetSet
SizeSize
Crop start frame
Fn1
Adjust.
Crop end frame