15. Wi-Fi/Bluetooth – Connecting to a Smartphone
624
Using Password Authentication to Connect
You can enhance Wi-Fi connection security by using password
authentication through either QR code or manual input.
Scanning QR code to connect
1 Set [Wi-Fi Password] on the camera to [ON].
• [ ] [ ] [Wi-Fi] [Wi-Fi Setup] [Wi-Fi Password] [ON]
2 Display the QR code (A).
• [ ] [ ] [Wi-Fi] [Wi-Fi Function] [New Connection]
[Control With Smartphone]
• You can also perform the same operation by pressing the Fn button assigned
with [Wi-Fi]. (Fn Buttons: 471)
• Press or to enlarge the QR code.
• When a device different than the one you want to connect to is displayed, the
camera will automatically connect to that device if you select [Yes].
If there are other Wi-Fi connection devices nearby, we recommend using either
QR code or manual password input to connect with password authentication.
(Using Password Authentication to Connect: 624)
• When the following functions are being used, [Wi-Fi Function] is not available:
– [Streaming Function]
– [Auto Transfer]
To Next Page
Loading...
