Panasonic MicroClear TK-CS200 - Bypass Selector Maintenance

English
Maintenance
(continued)
Bypass selector mounting part
Remove the bypass selector, then
rinse the lter and water intake.
z
The water ow may decrease when
the lter in the bypass selector
connection area becomes clogged
with impurities.

How to remove
①
Set the bypass selector to “ ”.
②
Loosen the nut, remove the bypass
selector, and take out the gasket and
lter.
Filter
Nut
Gasket

How to attach
Be sure to follow this order.
①
Reinstall
Ensure to
install
②
Securely tighten the nut.
③
After mounting the bypass selector,
set the lever to “ ” and allow water to
ow for about 5 seconds.
Tighten
rmly by
hand
●③
②
Once a year
Water intake
Filter
Using a
toothbrush or
similar tools
EN13
TK-CS200_01_EN.indd 12TK-CS200_01_EN.indd 12 2022/12/15 18:41:432022/12/15 18:41:43