Panasonic NA-168VG2 - Page 32

ProcedureFigure
2.Remove the seven screws mounting the body
band A.
3.Remove the body band B.
4.Take out the body band A.
After remove the door unit, and the body band A,
1.Remove the two screws mounting the door lock
switch.
2.Loosen the lead wire holder, remove the tape
and the insulation cover.
3.Remove the two connectors to remove the door
lock switch.
1.Remove the two screws mounting the door button.
2.Remove the hook from the door lock switch.
-32-
9 Replacement of
the door lock
switch
10 Replacement
of the door button
Description
NA-168VX2/168VG2/148VA2/128VA2/147VB2