ProcedureFigure
1.Open the filter cover.
2.Remove the two screws mounting the panel A.
3.Remove the hose out from the hose holder.
4.slide the panel A to left slightly to remove as
shown in left figure.
After remove the panel A,
1.Remove the body band B by long nose pliers.
2.Remove the wringer frame packing(Made of
rubber) from the body B.
3.Remove the eight screws mounting the body B.
4.Unfix the lead wire holder at right portion.
5.Hold the body B and pull it up slightly to remove.
-33-
Slide
11 Replacement
of the panel A
12 Replacement
of the body B
Description
NA-168VX2/168VG2/148VA2/128VA2/147VB2
To Next Page
Loading...
