Convenient Functions Maintenance
11
Water supply lter
If water does not ow smoothly
NOTE
● Do not throw away or puncture the lter
to avoid damaging feeding valve.
● Please clean the feeding valve frequently
if there is impurities in water supply such
as mold, iron, etc.
● Follow the procedure below to prevent
splashing of water.
1
After turning off the water faucet
Turn the power on.
2
Start.
3
After approx. 40 seconds
Turn the power off.
4
Loosen the nut and remove
the hose.
Tub
Once a week <Air Dry>
1
After operation ends
Run the Air Dry program without
loading laundry. (P. 9)
Once a month <Tub Hygiene>
Preparation: Turn on the water faucet.
1
Without loading laundry
Turn the power on.
2
Press.
3
Start.
When the tub is lled with water
Pause.
4
Put bleach in the tub.
● Use chlorine bleach for
clothes.
Approx. 200 ml
5
After closing the lid
Start.
After approx. 2 hours and
a half, tub cleaning ends.
5
Remove the lter and remove
dirt on the lter.
Water supply lter
Main unit, lid
If stained with detergent or softener
Wipe with a soft cloth.
(To prevent damage to resin parts or metal corrosion)
● For heavy soil, wipe with a neutral kitchen detergent.
● Do not splash water.
To Next Page
Loading...
