Panasonic NA-F135X1

7. WASHING
Preparation:
● Check if the washing machine is properly installed. (P.7)
● Turn on the water faucet.
23
Timer preset
1
After loading laundry
Turn the power on.
● The Normal program is selected when
the power is turned on.
Select a program. (P.6)
■
Timer preset
Start.
The pulsator moves without
water and measures the
amount of laundry (approx. 5
seconds).
Water amount indication
(approx. 5 seconds)
Remaining time indication
● To check the water amount
→Press“WaterLevel”.
According to the water amount indication
Put in detergent.
● Approx. 20 seconds after the water
amount is displayed, water supply
begins.
Close the lid.
Operation ends with beeps.
Set how many hours later to nish
operation. (P.9)
● 2 minutes after start-up, all indications except
turn off.
● Toconrmafterthetimerhasbeenset,press
.
● To cancel or change, press
.
● The hours that can be set differ depending on
the program.
When the Fragrance program is
selected
Thebuzzersoundsbeforethenalrinseand
operation is paused. Put the desired amount
of softener which has been diluted with water
directly into the tub.
5 beeps
● The Fragrance program cannot be selected
when Child Lock (P.12) is set.
● Operation will resume if the lid is left closed
for more than 1 hour.
■
After pressing “Start”
● You can change the water level until the end
of the wash process.
● You can change each of the “Wash”, “Rinse”
and “Spin” operation contents until the end of
the wash process. Press “Pause” beforehand.
● You cannot change the program.
- 10 -