Panasonic NN-DS596B - To Set Standing Time; To Use Timer (Kitchen Timer;Standing Time;Delay Start)

- Eng-31 -
To Use Timer (Kitchen Timer/Standing Time/Delay Start)
This feature allows you to program the oven as a kitchen timer. It can be also used to program a stand time after
cooking is completed or to program a delay start.
To Set Kitchen Timer.
3. Set desired amount of time by
using the dial. (up to 1 hour 30
minutes)
4. Press Start pad.
Time will count down
without oven operating.
1. Turning the dial anti-
clockwise until the
" " symbol appears
in the display.
2. Press once to verify
your selection.
To Set Standing Time:
5. Set desired amount of
standing time by using
the dial. (up to 1 hour 30
minutes)
6. Press Start pad.
Cooking will start. After cooking,
standing time will count down
without oven operating.
3. Turning the dial anti-
clockwise until the
"
" symbol appears in
the display.
4. Press once to verify
your selection.
2. Press once to verify
your selection.
Set the desired
cooking program.
(up to 2 stages)
F0003BU00QP_Eng_04_160622.indd 31 2016/6/23 11:22:37