- Eng-43 -
Auto Cook Setting (Method 2) (continued)
For menus 1-6, please operate as follows:
Auto Steam menu:
Notes:
1. For larger weights on the auto programs, it will be necessary to re-fill the water tank during cooking.
2. Do not cover foods on the auto steam programs.
3. Most foods benefit from a STANDING time after cooking on an auto program, to allow heat to continue
conducting to the centre.
4. To allow for some variations that occur in food, check that food is thoroughly cooked and piping hot before
serving.
5. Cook according to the following cooking method.
6. When you select an automatic program, auto cook menu number and symbols (as shown below) will appear in
the display.
For quick selection, we classify menus No.1 - No.6 under Steam Auto pad. This method allows you to select
your desired menu directly by pressing Steam Auto pad.
1
Select Auto Steam Menu by Press .
Continuously pressing the Steam Auto pad until the desired menu appears in the display.
2
Set Serving/Weight.
Set Serving/weight by using the dial.
3
Press
Press Start pad. The cooking time appears in the display window and begins to count down.
* indicates the Grill Tray should be used during cooking and placement of the tray.
F0003BU00QP_Eng_04_160622.indd 43 2016/6/23 11:22:38
To Next Page
Loading...
