- Eng-42 -
Auto Cook Setting (Method 1) (continued)
1
Select Auto Cook Menu.
Turning the dial clockwise until the desired Auto Cook Menu Number appears in the display.
2
Press .
Press once to verify your selection.
3
Set Serving/Weight.
Set Serving/weight by using the dial.
4
Press
Press once to begin preheating. "Preheat" will blink. After preheating, the oven will beep and the "Preheat"
will stop blinking, please put the food into the shelf position within 2 minutes, then close the oven door im-
mediately.
After preheating, the oven will beep 3 times, put the food into the oven immediately.
5
Press .
Press Start pad. The cooking time appears in the display window and begins to count down.
For menus 23-25 please operate as follows:
With Preheating:
Notes:
When you select an automatic program, auto cook menu number and symbols (as shown below) will appear in
the display.
* indicates the wire rack or Grill Tray should be used during cooking and placement of them.
* indicates healthy menu.
F0003BU00QP_Eng_04_160622.indd 42 2016/6/23 11:22:38
To Next Page
Loading...
