- Eng-49 -
Cleaning Setting (continued)
28. System Cleaning Setting:
The first stage of this program cleans the system with a citric acid solution. The second stage runs water through the system to
rinse the pipes.
Notes:
1. If the system cleaning program is not used regularly, the pipe will get blocked and the steaming performance
will be less effective.
2. Do not remove the drip tray during the drain program. If the drip tray is removed during the program.
3. Empty the drip tray and rinse with running tap water after the program has finished.
1
Make a solution of 16 g citric acid and 200
g
of water, add the solution to
the water tank. Ensure drip tray is empty.
2
Select
"System Cleaning".
Turning the dial clockwise until menu number "28" and "
" symbol appears in the display windows.
3
Press .
Press once to verify your selection.
4
Press .
Press Start pad. The cooking time appears in the display window and begins to count down. The program
will run for approx. 29 minutes.
5
After the program has paused, empty the drip tray and fi ll the steam tank
with water (to max level).
6
Press .
Press Start pad. The program will run for approx. 1 minute. Empty the drip tray after the program has fi n-
ished.
F0003BU00QP_Eng_04_160622.indd 49 2016/6/23 11:22:39
To Next Page
Loading...
