23
4. If the sign "H**"is displayed on LED, press "Refrigerator" button for 5 seconds.
H**sign will disappear on LED soon.
If the defective condition continues, the "H**"sign will be displayed again.
("U10"and defective record will not be deleted.)
5. "U10"will disappear when to unplug. However trouble continue, the sign "U10"appear again.
6. When some troubles happens on same time, LED indicates each sign for 1 second.
7. *2...If a signal circuit is disconnected, a fan motor will become a high velocity revolution and a refrigerator will not cause the
shortage of cooling.
8. *3..All LED on the door blinks at the same time when "H43" displays.
9. It becomes a protection stop, about eight days after H21 display, and the test control doesn't work.
Detaching the power plug or the connector detaching in ice maker A’ssy lead line is necessary for the restart of the control.
To Next Page
Loading...
