29
12 Disassembly and Assembly Instructions
12.1. DISASSEMBLY OF PC
(Refrigerator Compartment)
1. Remove the water supply tank, shelf and chilled case.
• Pull up center area of Plate chilled top and remove 2 pro-
trusions, then take out Plate chilled top toward you.
2. Remove the chilled side plate.
• Pull up front area of chilled side plate, then remove
chilled side plate toward you.
3. Remove lamp cover PC
• Pull Lamp cover PC toward you and unhook hooks (2
portions) of back side.
• Unhook lower hooks (2 portions) of Lamp cover PC
lower side and remove Lamp cover PC.
4. Remove PC duct plate
• Twist and remove rivets (2 pieces).
• Pull PC duct plate toward you.
5. Remove the pump cover
• Unscrew the screw.
• Tank plate cover T is pryed open in a minus driver, then
pull it up.
6. Remove tank side plate
• Pull up tank side plate a little, and insert the screw driver
(-) into triangle mark portion of tank side plate.
• Pull up the stopper of tank plate cover T, pull tank side
plate toward you.