Panasonic NV-VX55A - Mix Function

50
Using the Mix Function
When
this
function
is
activated
and
you
start
recording
a
new
scene,
first
a
still
picture
of
the
last
recorded
scene
appears.
The
moving
picture
of
the
new
scene
then
gradually
appears
superimposed
over
the
still
picture
which
gradually
disappears.
Press
the
[D.EFFECT]
Button
until
the
[MIX]
Indication
@
appears.
©The
Digital
Effect
Indication
Lamp
[(G)]
lights.
2
Press
the
Recording
Start/Stop
Button
to
start
recording.
3
Press
the
Recording
Start/Stop
Button
to
stop
recording
the
scene.
*The Movie Camera is in the Recording Pause
Mode.
The [MIX] Indication changes from @ to @ to
indicate
that
the
last
picture
of
the
just
recorded
scene
is
now
being
kept
in
the
digital
image
memory.
4
Press
the
Recording
Start/Stop
Button
to
start
recording
the
next
scene.
First,
the
stilt
picture
(from
the
memory)
appears
and
it
then
gradually
disappears
while
the
moving
picture
of
the
new
scene
gradually
appears.
®All subsequent scene-to-scene transitions will be
recorded with this Mix Effect until you cancel the
Mix Function.
@ Cancelling the Mix Function
Press the [D.EFFECT] Button repeatedly until none of
the 11 Digital Effect Indications are displayed.
@Performing Recording Check or pressing the [VCR/
CAMERA] Button does not erase the still picture of the
last recorded scene stored in the digital image
memory.
However, turning the Movie Camera off or again
selecting a Digital Effect Mode except Wipe erases the
stored still picture.