Panasonic NV-VX55A - Recording Situations Affecting Motion Sensor

57
@
The
Following
Recording
Situations
Could
Also
Activate
the
Motion
Sensor
Function:
A white wall or another single-colour background
behind the subject.
®A subject with horizontal, vertical or oblique stripes.
Sudden changes in the surrounding brightness.
eExposure of the Movie Camera to slight shocks or
vibration.
®Recording
in
a
dimly
lit
place.
(The
[MOTION
SENSOR] Indication flashes.)
Mi
The
Following
Recording
Situations
May
Not
Activate
the
Motion
Sensor:
*Extremely
slow
or
fast
movement
of
the
subject.
Very little movement of the subject.
®Recording in a dimly lit place. (The [MOTION
SENSOR] Indication flashes.)
#A very small subject.
Movement of the subject near the edge of the picture.
®A background with horizontal or vertical stripes.
®To prevent accidental recording start caused by Movie
Camera movement, the Movie Camera should be
mounted
on
a
tripod
or
be
otherwise
secured
In
a
very
stable position.
When the Movie Camera is in the Motion Sensor
Function
Stand-by
Moda,
it
is
not
possible
to
manually
start recording by pressing the Recording Start/Stop
Button or to activate the Super Image Stabilizer, Digital
Zoom, Digital Effect, Recording Check, or Camera
Search Function.
When you use the AC Adaptor to power the Movie
Camera, the Motion Sensor Function Stand-by Mode
will continue when no movement is detected in the
picture, even when the tape has reached the end
during recording. Therefore, we recommend that you
check the tape within a week. When you use the
Battery to power the Movie Camera, it remains in the
Motion Sensor Function Stand-by Mode until the
Battery is discharged, at which time the [CAMERA]
Lamp flashes for a few seconds.
To ensure correct functioning of the Motion Sensor
Function, the moving subject should be quite large in
the picture. Therefore, when you have zoomed the
lens to the maximum wide-angle position, the distance
between lens and subject should preferably be within
about 2 metres. For subjects at larger distances, be
sure to zoom in accordingly.
The Movie Camera requires time to set up before
recording starts. Therefore, the beginning of
movement is not recorded.
@\f there is a power interruption, the Motion Sensor
Function is cancelled.
elf an Error Code (= 85) appears, the Motion Sensor
Function is cancelled.