Panasonic NV-VX55A - Motion-Sensor-Controlled Recording

3 MENU
1 pause soe
MOTION SENSOR
MAIN MENU
SPEED »SP
TAPESE »30
TITLESET = OFF
APS P OFF
209M, 42x
SMsenson = oF
“SHOTTER'REC P OFF
SELF SHOT NORA.
PRESS MENU TO EXIT
Motion-Sensor-Controlled
Recording
In this mode, recording automatically starts when the
built-in Motion Sensor detects some movement in the
picture.
After displaying the Main Menu [MAIN MENU]...
(> 19)
Press the [ITEM] Button repeatedly to
select {M.SENSOR].
2 Press the [SET] Button to select [ON].
3 Press the [MENU] Button to exit the
Menu Function.
eThe Motion Sensor Function Stand-by [STDBY]
Indication appears.
The Tally Lamp (1) lights when recording starts.
Approximately 1 second after the Movie Camera’s
Motion Sensor has detected movement in the picture,
recording automatically starts. Approximately 10
seconds after movement in the picture has stopped,
recording automatically stops and the Movie Camera is
in the Motion Sensor Stand-by Mode.
When the Movie Camera remains in the Motion Sensor
Stand-by Mode for more than 6 minutes, the Finder
automatically turns off to conserve power. When the
Motion Sensor again detects movement in the picture,
recording automatically restarts after approximately
4 seconds and the Finder turns on.
@ Cancelling the Motion Sensor Function
During Recording
Press the Recording Start/Stop Button for 2 seconds.
56