[_' Check list before you begin
[] All connections are made (see page 5).
[] Your Combination VCR is plugged in.
Blue ,,u_llbu,_ leitels t ux [] - _l'_J) curr_spul]d with lold uu_ L,ulltroI He|er_i_uu L_ulae (trollt pdgu).
1Nress m
_ to display the menu screen.
1 Press (_ IFI ( or n )
_ to turn the Combination VCR on.
Then, select a channel
using the CHANNEL UP/DOWN or
NUMBERED keys.
MENU .........
SET UP VCR
SET CLOCK
SET UP CHANNEL
, _'rP,TEroSEU_CT IDIOMA (ENGLISH)
'[,' SELECT ROTATE WHEEL
Use SET . PUSH WHEEL
_'J_4: P_o END PUSH MENU KEY
totirst,selectSET UP"IV andthen,to selectVIDEOADJUST.
L _7 °
to select and display the
'" desired video adjust overlay.
(See description below.)
TINT .... I......
BRIGHT ....... I......
PICTURE .............. I
SHARPNESS ...... I......
NORMAL
SELECT ROTATE WHEEL
SET . PUSH WHEEL
END : PUSHMENUKEY
i d)
3 _' Press(_ F_ (or I_1 )
,. to adjust the volume level.
24 IIIIIIIIIII .................
When selecting CATV channels 100 to 125 with
the NUMBERED keys, first press the 100 key
and then enter the remaining two digits.
For example, for channel 125:
Press NUMBERED keys 100-2-5.
14 I UNL
Press O
to display the
last channel you
were watching.
Prevlbub Hr_s_III
Channel Channel
CH08",_'CH10
When selecting channels with the CH UP/DOWN
key, the channels must be displayed for at least 4
seconds in order for the Combination VCR to
recognize them as a new selection.
MUlE
Press O
to instantly mute the sound.
Press again, to restore the prewous sound level.
Connect an earphone tnot supplied) oi neddpnone I
(not supplied) tothe Phones jack g. j
10
Ose C
,,_to adjust a-_n'clset the control.
, _: • Repeat steps 3 and 4 to adjust the pictureas necessary.
Press _ _'] twice
to exit this mode.
. If no button is pressed within 5 minutes, the
video adjust overlay disappears.
• Adjustment scale and setting indicator number
are displayed to assist you.
COLOR Control
To adjust the _ntensityof the colors.
TINT Control
To adjust for the most natural
fleshtones.
BRIGHT Control
To adjust the brightness of the
picture.
PICTURE Control
To adjust the intensity of the
picture by adjusting contrast and
color level at the same time and
in the proper balance.
SHARPNESS Control
To adjust the sharpness of the
picture.
I
32 buLOR
IIIIIIIlllllllll ..........
0 TINT
.............. I ........
-(R) • (G) +
32 BRIGHT
IIIIIIIIIIIIIIII .................
63 PICTURE
lllllIlllllIlllllllllllllllIIIll
32 SHARPNESS
IIIIIIIIIIIIIIII ................
ADJUST ROTATE WHEEL
SET PUSH WHEEL
J
In steP,o,,,_3above,,o,<_<_, i" COLOR [..... ::i[.:.:--
BRIGHT ...... I.......
PICTURE ............... I
Use SHARPNESS ......... I........
to select and set NORMAL / SELECTsET ROTATEpusHWHEELWHEEL
All controls return to factory settmgst END PUSHMENUKEY
1
To Next Page
Loading...
