Blu_ _u_lbu_s, letter_ [ ex. ill - [] ) cur_ubpu_ct with told-out L,u_troI Helererlce Gutde (front page).
I_ Check list before you begin
[] All connections are made (see page 5).
[] Your Combination VCR is plugged in.
[] The clock is set.
[] The tape is long enough.
[] The record tab is in place•
Press _ _ul
for program mode•
• If a program has already been
set, select a blank program
number with the Wheel.
_M"EI /START STOP 3Lp'CH_]
BY ROTATING WHEEL
PUSH WHEEL-)
TQ END PUSH PROG KEY
l!':_:_i:iandR°tate"°"(_]"_'I_j
..,r_ ', press _,_
to select and enter the date. (See example below.)
Setting
the Date
\
Rotate*O0"YSRotate
Wheel DATE Wheel
Down I Up
WEEKLY(SAT)_7 "_8--9 .... 31_
804 _°
I
: 1
WEEKLY
WheelSelectionOrder I
(MON)
I
WEEKLY(SUN)_ DAILY_ 6 ...... ""
Then, select and enter
each program item (start time, stop time, etc.)
as it appears on-screen.
To make corrections:
Press the Wheel or CLEAR button repeatedly to
move back or forward to the desired item.
3
16
Press _
to finish the program.
Then,
set the next program
by repeating steps 2 and 3.
press PROG
tO exit the programming mode
and set the Timer,
P DT SlART SlOP CH SPD
il_.L _ el. eL l; "
2
3
4
SELECT 1-8 ROTATE WHEEL
ENTER PUSH WHEEL
CANCEL PUSH CLEAR KEY
END PUSH PROG KEY
• The PROGRAM TIMER indicator lights on the front
TwPaneL
o minutes before the Timer Recording
starts, "TIMER REC WILL START SOON" will
appear on-screen. If "PLEASE PREPARE FOR
TIMER REC" appears and/or the PROGRAM
TIMER indicator flashes, check that a cassette
with record tab is loaded and the Combination
VCR is in Stop mode.
In step 2,
hOIAE_ lU bLLt
Use
PUSHrO
SET
to enter DAILY or WEEKLY
in place of the Date.
Weekly recordings
require that you enter the day
of the week. See the
"Wheel Select0on Order"
in step 2 on this page.
Then, continue
with programming.
xDJ_IF_./ b IAH I STOP
_1:IlI"--........ I
• m I
BY ROTATING WHEEL I
PUSH WHEEL-) I
• TO END PUSH PROG KEY J
_kgEI /START STOP CH ]
m::_k......... 1
_J_-- _/
BYROTATING WHEEL /
PUSH WHEEL_ /
TO END PUSH PROG KEY J
J
Ho,d kl
( or I_I) down
bl(J_ [
I fO CANCEL TIMER REC
HOLD DOWN STOP KEY
FOR APPRO× 3 SEC
for a few seconds to cancel
the Timer Recording.
• Any future daily or weekly
recordings will be performed /
as programmed•
(Recording is not _nprogress.)
Press _(_o_ _1
to display all programs.
ROTATE TO SELECT
rotate _o_,o
to select the desired
program number.
Then, (_)
press CLEAR
to clear the program.
Now,
press PROG
to return to normal TV.
p DT START STOP CH SPD /
Illl _4" ql. II. I,_ "
J
2 8 10 OOp 12 OOp 125 SLP
3 10 800p 900p 10 SP
4 SU 900p 10 OOp L SLP
SELECT 1-8 ROTATE WHEEL
ENTER PUSH WHEEL
CANCEL PUSH CLEAR KEY
END PUSH PROG KEY
i_ DTS_T__T_S__O____C._S____1
2 8 10 OOp 12 OOp 125 SLP
3 10 800p 900p 10 SP
" SU 900p 10 OOp L SLP
SELECT 1-8 ROTATE WHEEL
ENTER PUSH WHEEL
END PUSH PROG KEY
To Next Page
Loading...
