Panasonic Omnivision VHS PV-M2035

Blue rlurnburs, letters _ ex. 1,1 - _[1_1) colrubpur_d will/ lola-out bOfhUOI Hulel_uu L_ulde /tlur_[ pdgu)
Check list before you begin
[] All connections are made (see page 5).
[] Your Combination VCR is plugged in.
FJ
i
i
Combination VCR power comes on automatically.
_:_4_._:;_:: it:_,
_'tnsert a
1 "| cassette
.Z _ with record t_l_,
're'sSi='or=,
to select a channel to
be recorded.
• To record from an outside
source, see "Selecting the
Input Mode" on this page.
Press E6°
until the desired speed
appears on-screen.
02
Pressr '-_ t '
REC/TIME
@ I_ ( or _1 andU )
to start recording.
REC
• The on-screen display changes
as shown. Press the REC/
TIME button again if you want
to set a recording length. (See
the "One Touch Recording"
section on this page for more
details.)
02
SLP
TO SET SPECIFIC REC TIME
PLEASE PUSH REC KEY
' I
After 2 seconds
4,
REC CH 02
O CO 30
(('STEREO <'- SLP
[_SAP
MONO
5' Preset6 _]
•_. to pause or resume the recording.
STOP
6 Press _ I_Jl(or El )
_i, to stop recording.
14
TO SET SPECIFIC REC TIME
PLEASE PUSH REC KEY
]
You Cdn set up the Combination VCR to turn _tselt
off at a preset time making it a one touch timer
recording.
In step 4,
Continue REC#rlME
tO press @ _ ( or U)
to set the recording length.
Each press will change the time as shown
in the diagram below.
q: _: r mj; :_: c<___:O0:_OZ:13:_b
Press _ r_
to display the menu screen.
ROTATE TO SELECT
use ......
SET
to first, select SET UP VCR
from the menu and then,
select INPUT SELECT.
ROTATE TO SELECT
use ......
SET
to select "TUNER" or "LINE".
Now,
press I[I] twice
to exit this mode.
tJUJU
/ SETCLOCK /
/ SET UP CHANNEL/
I IDIOMA (ENGLISH) I
/SELECT ROTATE WHEEL I
ISET PUSH WHEEL I
_END PUSH MENU KEY J
...... SET UP VCR ......
REPEAT PLAY OFF
SELECT ROTATE WHEEL
SET PUSH WHEEL
END PUSH MENU KEY
• You can also select LINE using the CH UP/
DOWN.
The numbers will change in the order shown
below.
F.I_ 1i 213
( (CATV) (CATV) (TV) _)
_LINE_125 or 69< I-'
Helpful Notes
• While it is possible to change the tape speed when
you are recording, there will be some distortion on
the tape where the change occurred.
• Press PAUSE to pause normal recordings in
progress One Touch Recordings can go _nto Pause
mode.
• After the Combination VCR has been in Pause mode
for 5 minutes, it will stop automatically to protect the
tape and video head.
• The recording t_me remaining will appear when the
DISPLAY button is pressed during OTR mode (See
page 9).