Panasonic Omnivision VHS PV-M2035

...Continued from page 6
If YOUSelected YES in Step 4
Set your cable box
to PBS station and then,
press the Wheel to go to
the next step.
ROTATE TO 6ELECT
.ow,u.e@m
PLEASE SET YOUR CABLE
BOX TO YOUR LOCAL PBS
CHANNEL
NEXT . PUSH WHEEL
PUSH TO
_-r _ ..... SET CLOCK ........
to select and enter the l PLEASEENTERCABLEBOX
cable box output channel OUTPUTCHANNEL
number, re=,a
(the channel you tune the SELECTROTATEWHEEL
combination VCR to in SET PUSHWHEEL
order to watch cable END PUSHMENUKEY
station.)
if You Selected NO in Step 4
ROTATE TO SELECT
,u,, to select and enter your
PBS channel number.
...... SET CLOCK ........
PLEASE ENTER YOUR LOCAL
PBS CHANNEL
/
SELECT ROTATE WHEEL
SET PUSH WHEEL
END PUSH MENU KEY
These on-screen displays will appear in sequence.
• AUTO CLOCK SET PROCEEDING
• AUTO CLOCK SET COMPLETED
• The lowest numbered channel OR
+
-+
+;
NOTE:
This screen appears If: AUTOCLOCKSET
• An entry error was made. ,s INCOMPLETE
• AUtOClock Set is not
available for the PBS PUSH WHEEL TO SET CLOCK
channel selected.
Try entering another PBS channel.
If Auto Clock Set cannotbe performed, please
set the clock manually as described at right.
Helpful Note:
• It takes about 10 seconds for the Combination VCR to
determine whether or not Auto Clock Set is available.
Then, depending on your local broadcasting company,
it takes from about 1 minute to 10 minutes to set the
clock. If you would rather not wait, please press the
STOP button and set the clock manually.
Manual Clock Set
ROTATETO_LJ_CT
Press _ _']
PUSH TO
SET
to display the set clock
screen.
SET )K .......
--/-L\- b_i ON
BY ROTATING WHEEL
PUSH WHEEL "}'
TO END PUSH MENU KEY
to select and enter the month, date, year,
time, and D.S.T. (Daylight Saving Time).
• The day of the week appearsautomatically.
• "DST: ON" automatically adjusts fordaylight
saving time. (See page 22 for details.)
To Make Corrections, press the
Wheel or CLEAR button repeatedly to
move back or forward to the desired item.
Now,
press _ _j twice
to startthe clock and exit this mode.
See page 8 to change or re-enter
items in this setup.
You will find out how to:
• set or reset the clock.
• change the on-screen display language.
• replace channels in memory.
• add or delete a channel from memory.
7