6.4. Removal of K1-P.C.Board
1. Remove the upper case according to the section 6.2.
"Removal of Upper Case".
2. Unscrew the 2 screws and remove the A-P.C.Board block.
3. Unscrew the 1 screw and release the grounding terminal.
4. Unscrew the 4 screws and remove the block of Analysis
Block, LCD Block, Shift Mechanism and Projection Lens.
5. Unscrew the 4 screws and remove the intake air duct 2.
6. Unscrew the 1 screw and remove the intake air duct 1.
7. Unscrew the 3 screws and remove the K1-P.C.Board.
6.5. Removal of R-P.C.Board
1. Remove the upper case according to the section 6.2.
"Removal of Upper Case".
2. Unscrew the 2 screws and remove the V-P.C.Board.
17
PT-AE2000U / PT-AE2000E
To Next Page
Loading...
