Panasonic PT-AE2000U

4. Connect the service kit (extension cables).
· Each flexible cable of LCD Panels (R/G/B) - Connectors (A1/A2/A3) on A-P.C.Board
· Intake fan connector - Connector (A15) on A-P.C.Board
· Power fan connector - Connector (A16) on A-P.C.Board
· PBS fan connector - Connector (A18) on A-P.C.Board
· Thermosensor (Intake air) connector - Connector (A7) on A-P.C.Board
· S-P.C.Board connector - Connector (A8) on A-P.C.Board
5. Covering with an insulator (cloth or the like) to prevent a short circuit, set the A-P.C.Board block on the main unit.
Note:
· Handle with care not to apply external force to connecting parts which connect the main unit and A-P.C.Board.
7.4.3. Adjustment Procedure
7.4.3.1. Outline
When the lighting area is off from the adjustment and color unevenness appears, adjust the lighting area into correct position.
Symptom Measure
Magenta unevenness G Reflector Adjustment
Cyan unevenness R Reflector Adjustment
Yellow unevenness B Reflector Adjustment
· Shifting the mirror adjusting lever horizontally, adjust color unevenness on the screen upper/lower sides.
· Twisting the mirror adjusting lever, adjust color unevenness on the screen right/left sides.
25
PT-AE2000U / PT-AE2000E