To Next PageTo Next PageWhat to do if video from HDMI compatible device does not appear or it appears jumbled on Panasonic PT-AE8000U Projector?
If video from an HDMI compatible device does not appear or is jumbled on your Panasonic Projector, ensure the HDMI cable is fully inserted. Also, verify that a compatible signal is being input.
Why is the color pale or grayish on my Panasonic PT-AE8000U?
If the color on your Panasonic Projector appears pale or grayish, the [COLOR] and [TINT] settings may not be adjusted correctly. Also, check the settings on the device connected to the projector to ensure they are properly configured.
Why is 3D video disrupted while viewing a 3D video on Panasonic Projector?
3D video disruption on your Panasonic Projector may be caused by the 3D Eyewear having a low battery. Try charging or replacing the battery of the 3D Eyewear.
General| Matrix size | 0.74 \ |
|---|---|
| Native aspect ratio | 16:9 |
| Projection distance | - m |
| Vertical scan range | 24 - 85 Hz |
| Horizontal scan range | 15 - 74 kHz |
| Projection technology | LCD |
| Contrast ratio (dynamic) | 500000:1 |
| Contrast ratio (typical) | - |
| Screen size compatibility | 40 - 300 \ |
| Projector native resolution | 1080p (1920x1080) |
| Keystone correction, vertical | -30 - 30 ° |
| Focal length range | 22.4 - 44.8 mm |
| Aperture range (F-F) | 1.9 - 3.2 |
| Vertical lens shift range | -100 - 100 % |
| Horizontal lens shift range | -26 - 26 % |
| Lamp type | UHM |
| Lamp power | 220 W |
| Light source type | Lamp |
| Service life of light source | - h |
| HDCP | Yes |
| Noise level | - dB |
| Dot clock scanning frequency | 154 MHz |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Analog signal format system | NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM |
| Built-in speaker(s) | No |
| HDMI ports quantity | 3 |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | 0 |
| Compatible memory cards | Not supported |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | Black |
| Market positioning | Home cinema |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.08 W |
| Power consumption (typical) | 310 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
Weight and Dimensions| Depth | 364 mm |
|---|---|
| Width | 470 mm |
| Height | 151 mm |
| Weight | 8717 g |
Highlights 3D capabilities for diverse content in high quality.
Warnings and precautions regarding power supply, cords, and electrical shock.
Guidelines for safe installation, avoiding obstructions, and proper placement.
Safety instructions for batteries, lamp replacement, and remote control.
Guidelines and warnings for viewing 3D content and using 3D eyewear.
Guidelines for safely moving and setting up the projector.
Settings for high altitudes and placement rules for ventilation and stability.
Instructions for connecting the power cord and interpreting the power indicator.
Step-by-step guide to turn the projector on and start projection.
Step-by-step guide to safely turn the projector off.
Steps for adjusting image angle, lens shift, focus, and zoom.
Safety guidelines and potential issues when using 3D eyewear.
Correcting vertical distortion caused by projector angle.
Troubleshooting issues related to high projector temperature.
Troubleshooting issues related to lamp failure or damage.
Steps for removing, cleaning, and reattaching the air filter unit.
Detailed steps for safely replacing the projector's lamp unit.
Guidance on lamp lifespan and replacement indicators.
Common problems like no power, no picture, or fuzzy picture and their causes.
Troubleshooting remote control malfunctions and picture display errors.
Addressing issues with 3D video and computer image display.
Guidelines for safe installation of ceiling mount brackets.
How VIERA Link controls compatible equipment using HDMI.
Information on RS-232C serial connection and computer control commands.
Detailed list of commands, control contents, and parameters for computer control.
Technical details including power, display, lens, and operating environment.
