7.6.2. Operating Procedure
1. Run software program by the keyboard entry.
Note:
·
Use the software program as below.
Adjustment Tool [AX100]
2. The first menu is Port selection menu.
3. Adjust the projector by selecting the necessary item from the menu in each stage.
7.6.3. Port Selection Menu
Select the port name of PC which connects with the projector, then click [Data] or [Adjustment] button.
7.6.3.1. Explanation of Buttons
Data:
Displays the data transmission/reception menu.
Adjustment:
Displays the adjustment menu.
Exit:
Exits this application.
27
PT-AX100U / PT-AX100E
To Next Page
Loading...
