(3) Press the ENTER button.
The OPTION2 screen will be displayed.
(4) Select RS232C using the or buttons.
(5) Press the ENTER button.
The RS-232C screen will be displayed.
(6) Select SERIAL IN using the or buttons.
(7) Press buttons to switch SERIAL IN.
RS-232C and RS-422 will switch each time the button is pressed.
(8) Select communication conditions using the or buttons.
(9) Press buttons to confirm the setting.
(10) Press the MENU button 3 times.
The on-screen indications disappear, and the system returns to the
normal screen.
6.5. Control commands
6.6. Cable specifications
19
PT-D10000U / PT-D10000E / PT-DW10000U / PT-DW10000E
To Next Page
Loading...
