(1) Remove the upper case according to the section 12.2. "Removal
of Upper Case".
(2) Unscrew the 3 screws and remove the J2-P.C.Board.
12.9. Removal of L1-/L2-/L3-/L4-P.C.Board
·
The procedure is described as an example of L2-P.C.Board.
(1) Loosen the 1 screw until it idles and open the lamp unit cover.
(2) Loosen the 3 screws until they idle and remove the lamp unit 2.
32
PT-D10000U / PT-D10000E / PT-DW10000U / PT-DW10000E
To Next Page
Loading...
