(9) Unscrew the 4 screws and remove the B/Q-Module.
12.18. Removal of PF-Modele
(1) Remove the ballast PFC cases 2 according to the steps 1
through 8 in the section 12.17. "Removal of B/Q-Module".
(2) Unscrew the 4 screws and remove the PF-Module.
12.19. Removal of PC-Module
(1) Remove the upper case according to the section 12.2. "Removal
of Upper Case".
(2) Unscrew the 4 screws and remove the DMD duct block.
39
PT-D10000U / PT-D10000E / PT-DW10000U / PT-DW10000E
To Next Page
Loading...
