Panasonic PT-FX500

Other manuals for Panasonic PT-FX500

Operating Instructions (Functional Manual)156 pages

Questions and Answers:

B
Brittany BakerAug 30, 2025
What to do if my Panasonic PT-FX500 Projector shows no image?
- R
  randy13Aug 31, 2025
  If no image appears on your Panasonic Projector, check the following: * Ensure connections to external devices are correctly performed. * Verify the input selection setting is correct. * Check that the [BRIGHTNESS] adjustment is not set to the minimum. * Confirm the external device connected to the projector is working properly. * Ensure the AV mute function is not in use. * Verify the lens cover is removed from the lens.
L
Lisa GonzalezAug 29, 2025
Why is my Panasonic Projector remote control not working?
- D
  Dawn JohnstonAug 30, 2025
  If the remote control for your Panasonic Projector isn't responding, consider the following: 1. Check if the batteries are depleted and replace them if necessary. 2. Ensure the batteries are inserted with the correct polarity. 3. Make sure there are no obstructions between the remote control and the projector's signal receiver. 4. Verify the remote control is being used within its effective operation range. 5. Check if other light sources, like fluorescent lights, are interfering with the projection. 6. Confirm that the [REMOTE CONTROLLER] setting in [CONTROL DEVICE SETUP] is not set to [DISABLE]. 7. Ensure the ID number setting operation is correct.
J
Jeffery RiggsAug 28, 2025
Why is the image not displaying correctly on my Panasonic PT-FX500?
- J
  Joshua CarrollAug 28, 2025
  If the image from your Panasonic Projector isn't displaying correctly, ensure the [TV-SYSTEM] and [RGB/YC C ]/[RGB/YP P ] selections are set correctly. Check for any issues with the video tape or other image sources. Finally, verify that the input signal is compatible with the projector.
J
Jesus BrockAug 27, 2025
What to do if image from computer does not appear on Panasonic Projector?
- J
  Jason OrtizAug 27, 2025
  If the image from a computer isn't appearing on your Panasonic Projector, check if the cable is too long. For D-Sub cables, ensure the length is 10 m (32'10") or shorter. Also, verify that the external video output on the laptop is set correctly. The external output settings may be switched by pressing the 'Fn' + 'F3' or 'Fn' + 'F10' keys simultaneously; refer to your computer's user manual for specific instructions, as the method varies.
K
Kenneth SanchezAug 27, 2025
How to fix a fuzzy image on a Panasonic PT-FX500 Projector?
- B
  Brandi GibsonAug 27, 2025
  If the image from your Panasonic Projector is fuzzy, ensure the lens focus is set correctly. Also, check if the projection distance is appropriate. Verify that the lens is clean and that the projector is installed perpendicular to the screen.
A
Anthony PerezAug 25, 2025
What to do if Panasonic PT-FX500 remote control does not respond?
- N
  Nicole RodriguezAug 26, 2025
  If the remote control for your Panasonic Projector isn't responding, check if the batteries are depleted and ensure they are inserted with the correct polarity. Make sure there are no obstructions between the remote and the projector's signal receiver. Verify that you're using the remote within its effective range and that other light sources, like fluorescent lights, aren't interfering. Also, check if the [REMOTE CONTROLLER] setting in [CONTROL DEVICE SETUP] is set to [DISABLE] and ensure the ID number setting operation is correct.
M
Mr. Tyler HardyAug 25, 2025
How to fix a Panasonic Projector that does not turn on?
- S
  Sandra GallegosAug 25, 2025
  If your Panasonic Projector isn't powering on, try these steps: * Ensure the power plug is firmly inserted into the outlet. * Check if the switch is set to ; if so, turn it on. * Verify the wall outlet is supplying electricity. * Check your circuit breakers to see if they have tripped. * Examine the lamp indicator and the temperature indicator to see if they are lit or blinking. * Make sure the lamp cover is securely attached.

Panasonic PT-FX500 Specifications

General

Brightness	5000 ANSI Lumens
Resolution	1024 x 768
Contrast Ratio	2000:1
Weight	10.4 kg
ANSI Lumens	5000
Technology	3LCD
Aspect Ratio	4:3
Lamp Life (Normal)	4000 hours
Throw Ratio	1.7-2.8:1
Noise Level (Normal)	37 dB
Noise Level (Eco)	29 dB
Lamp Type	UHM
Projection Size	40 - 300 inches
Input Connectors	HDMI, VGA, S-Video