Panasonic PT-FZ570U

Chapter 5 Operation of Function — Network connections
106 - ENGLISH
Network connections
This projector has network function that allows the following by connecting a computer. The wireless module (Model
No.: ET-WML100) of the optional accessories is required if the wireless LAN is connected.
f
WEB control
By accessing the projector from a computer, you can perform setting, adjustment, status display, etc. of the
projector. Refer to “Web control function” (
x
page 113) for details.
f
Multi Monitoring & Control Software
This software allows you to monitor and control multiple displays (projector or at panel display) connected to
the LAN. For details, please refer to the operating instructions for "Multi Monitoring & Control Software" included
in the supplied CD-ROM.
f
Early Warning Software
The projector supports “Early Warning Software”, which monitors the status of the display (projector or at
panel display) and the peripheral devices inside an intranet, and noties of abnormality of such equipment and
detects signs of possible abnormality. For details, please visit the Panasonic website (https://panasonic.net/cns/
projector/pass/).
f
Presenter Light
By using image transfer application software “Presenter Light” that supports Windows computers, you can
transfer images and audio to the projector via the wired LAN/wireless LAN. For details, please refer to the
operating instructions for "Presenter Light" included in the supplied CD-ROM.
f
VueMagic
By using still image transfer application software “VueMagic”, you can transfer images to the projector when
iPad/iPhone/iPod touch or Android terminals are connected to this projector through the wireless LAN. Refer to
“About VueMagic” (
x
page 112) for details.
f
PJLink
By using PJLink protocol, you can send inquiries about the operations or status of the projector from a computer.
Refer to “PJLink protocol” (
x
page 141) for details.
When connecting via wired LAN
The projector is equipped with a normal <LAN> terminal and a <DIGITAL LINK/LAN> terminal that can receive
Ethernet signals from a twisted-pair-cable transmitter together with video and audio signals via a LAN cable.
f
When you do not need to connect a twisted-pair-cable transmitter, connect to the <LAN> terminal or the
<DIGITAL LINK/LAN> terminal.
f
When you need to connect a twisted-pair-cable transmitter that does not support Ethernet signals, connect to
the <LAN> terminal.
f
When you need to receive Ethernet signals from a twisted-pair-cable transmitter, connect to the <DIGITAL LINK/
LAN> terminal.
Example of a normal network connection
Projector
Hub
LAN cable (straight)
LAN cable (straight)
Computer
Attention
f
When a LAN cable is directly connected to the projector, the network connection must be made indoors.
Note
f
A LAN cable is required to use the wired LAN function.