Panasonic PT-FZ570U

Chapter 3 Basic Operations — Projecting
ENGLISH - 49
f
Turning the focus lever changes the projection screen size. Make ne adjustments again to the projection screen size by turning the zoom
lever.
f
When there is distortion, execute the [POSITION] menu → [SCREEN ADJUSTMENT].
Adjustment range by the lens position shift (optical axis shift)
Based on the standard projection position using the optical axis shift function, the projection position can be
adjusted in the range shown in the following gures.
PT-FZ570 / PT-FW530 PT-FX500
0.3H 0.3H
0.6V0.6V
0.3H 0.3H
0.5V0.5V
Standard projection
position
Image height V
Image width H
0.3H 0.3H
0.6V0.6V
0.3H 0.3H
0.5V0.5V
Image width H
Standard projection
position
Image height V
Note
f
The best image can be achieved by installing the projector in front of the screen and adjusting the lens shift lever towards the center.