Panasonic PT-JW130FWE - Page 118

Chapter 5 Operations — Web control function
118 - ENGLISH
[Authentication set up] page
Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail.
Click [Detailed set up] → [Authentication set up].
1
2
3
4
5
6
7
8
1 [Auth]
Select the authentication method specied by your Internet
service provider.
2 [SMTP Auth]
Set when the SMTP authentication is selected.
3 [POP server name]
Enter the POP server name.
Allowed characters:
Alphanumerics (A - Z, a - z, 0 - 9)
Minus sign (-) and period (.)
4 [User name]
Enter the user name for the POP server or the SMTP server.
5 [Password]
Enter the password for the POP server or the SMTP server.
6 [SMTP server port]
Enter the port number of the SMTP server.
(Normally 25)
7 [POP server port]
Enter the port number of the POP server.
(Normally 110)
8 [Submit] button
Update the settings.
[Port set up] page
Set the port number used for command control.
Click [Detailed set up] → [Port set up].
2
1
3
1 [COMMAND PORT]
Enter the port number used for command control.
2 [Wake on LAN PORT]
When the [STANDBY MODE] menu is set to [NETWORK], enter
the port number used for the Wake on LAN function.
3 [Submit] button
Updates the settings.