Chapter 4 Settings — [NETWORK] menu
ENGLISH - 81
2) Press qw to select [USER1], [USER2], or [USER3].
3) Press the <ENTER> button.
f The [WIRELESS LAN] ([USER1], [USER2], or [USER3]) screen (1/2) is displayed.
4) Press as to select [NAME CHANGE].
5) Press the <ENTER> button.
f The [NAME CHANGE] screen is displayed.
6) Press asqw to select a character, and press the <ENTER> button to enter.
f Up to eight characters can be entered.
7) After the name has been entered, press asqw to select [OK], and press the <ENTER> button.
f When you press asqw to select [CANCEL] and then press the <ENTER> button, the changed name will
not be registered and the factory default name will remain.
8) Press as to select [NEXT], and press the <ENTER> button.
f The [WIRELESS LAN] ([USER1], [USER2], or [USER3]) screen (2/2) is displayed.
9) Press as to select [STORE], and press the <ENTER> button.
f Press as to select [RETURN] and then press the <ENTER> button to return to the [WIRELESS LAN]
([USER1], [USER2], or [USER3]) screen (1/2).
10) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
[NETWORK CONTROL]
Set up the control method of the network.
1) Press as to select [NETWORK CONTROL].
2) Press the <ENTER> button.
f The [NETWORK CONTROL] screen is displayed.
3) Press as to select an item, and press qw to change the setting.
[WEB CONTROL]
Set to [ON] to control with the web browser.
[PJLink CONTROL]
Set to [ON] to control with the PJLink protocol.
[COMMAND CONTROL]
Set to [ON] when you control the projector using control commands. Refer to “Control commands via
LAN” (x page 207).
[COMMAND PORT]
Set the port number used for command control.
[Crestron Connected(TM)]
Set to [ON] when you control the projector using Crestron Connected
TM
of Crestron Electronics, Inc.
[STORE]
Save the current network control settings.
4) Press as to select [STORE], and press the <ENTER> button.
5) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
[Panasonic APPLICATION]
(Only in the projector mode)
Congure the settings of the functions used when devices are connected to the projector via LAN using
Panasonic’s network application software.
Setting [LIVE MODE CUT IN]
Set whether to accept live mode cut-in by another user during live mode processing (image transfer) by “Wireless
Manager ME6.2” or image distribution by “Multi Projector Monitoring & Control Software”.
1) Press as to select [Panasonic APPLICATION].
2) Press the <ENTER> button.
f The [Panasonic APPLICATION] screen is displayed.
3) Press as to select [LIVE MODE CUT IN].
To Next Page
Loading...
