Panasonic PT-JW130FWE

Chapter 7 Appendix — Technical information
206 - ENGLISH
Technical information
Using the PJLink protocol
The projector supports PJLink Class 1. This means a computer can use the PJLink protocol to operate the
projector or query its status.
Control commands
The following table lists the PJLink protocol commands that can be used to control the projector.
f x characters in tables are non-specic characters.
Command Control details Parameter / return string Remark
POWR Power supply control
0 Standby
1 Power on
POWR?
Power supply status
query
0 Standby condition
1 Power on condition
2 Preparing for switching off the projector
INPT Input selection
31 HDMI
41 MEMORY VIEWER
42 SIGNAGE
INPT? Input selection query
51 Panasonic APPLICATION
52 Miracast
53 LIGHTING
AVMT AV mute control 30 AV mute function off
AVMT? AV mute function query 31 AV mute function on
ERST? Error status query xxxxxx
1st byte
Indicates fan errors, and returns
0 - 2.
f 0 = No error is
detected
f 1 = Warning
f 2 = Error
2nd byte
Indicates light source errors, and
returns 0 - 2.
3rd byte
Indicates temperature errors, and
returns 0 - 2.
4th byte
Indicates cover open errors, and
returns 0 or 2.
5th byte Returns 0.
6th byte
Indicates other errors, and returns
0 - 2.
LAMP?
Light source status
query
ERR1 Undened command
NAME? Projector name query xxxxx Returns the name set in [PROJECTOR NAME] of [NETWORK].
INF1?
Manufacturer name
query
Panasonic Returns manufacturer name.
INF2? Model name query JW130FBE/JW130FWE Returns model name.
INF0?
Other information
queries
xxxxx Returns information such as version number.
CLSS? Class information query 1 Returns class for PJLink.