Chapter 5 Operations — Web control function
120 - ENGLISH
Example of the E-mail sent for an error
The following E-mail is sent when an error has occurred.
=== Panasonic projector report(CONFIGURE) ===
Projector Type : JW130F
Serial No : DA1234567
----- check system -----
MAIN CPU BUS [ OK ]
FAN [ OK ]
INTAKE AIR TEMPERATURE [ OK ]
OPTICS MODULE TEMPERATURE [ OK ]
LD MODULE TEMPERATURE [ OK ]
LOW-TEMPERATURE [ FAILED ]
LD STATUS [ FAILED ]
INTAKE AIR TEMP.SENSOR [ OK ]
OPTICS MODULE TEMP.SENSOR [ OK ]
LD MODULE TEMP.SENSOR [ OK ]
BATTERY [ OK ]
PHOSPHOR WHEEL [ OK ]
COLOR WHEEL [ OK ]
COVER OPEN [ OK ]
(Error code 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 89)
Intake air temperature :158 degC / 316 degF
Optics module temperature : 28 degC / 82 degF
PROJECTOR RUNTIME 30 H
-------- Current status ---------
MAIN VERSION 1.00
NETWORK VERSION 1.00
SUB VERSION 1.00
POWER STATUS POWER=ON
INPUT HDMI
SIGNAL NAME ---
SIGNAL FREQUENCY ---kHz / ---H
----- Wired Network configuration -----
DHCP Client OFF
IP address 192.168.10.100
MAC address 00:16:E8:6A:42:7E
----- Wireless Network configuration -----
DHCP Client OFF
IP address 192.168.12.100
MAC address C0:D9:62:F5:46:5B
Mon Jan 01 12:34:56 20XX
----- Memo -----
To Next Page
Loading...
