Panasonic PT-JW130FWE

Chapter 4 Settings — [LIGHTING] menu
ENGLISH - 61
2) Press qw or the <ENTER> button.
f The [COLOR SETTING] individual adjustment screen is displayed.
3) Press qw to select [USER1] to [USER5].
4) Press the <ENTER> button.
f The [COLOR SETTING] screen is displayed.
5) Press as to select [BASE COLOR SETTING].
6) Press the <ENTER> button.
f The [BASE COLOR SETTING] screen is displayed.
7) Press as to select the base color, and press the <ENTER> button.
[SUPER WHITE]
Sets the base color to super white.
[NEUTRAL]
Sets the base color to neutral white.
[WHITE]
Sets the base color to white.
[WARM WHITE]
Sets the base color to warm white.
[LIGHT]
Sets the base color to light bulb color.
[RED]
Sets the base color to red.
[GREEN]
Sets the base color to green.
[BLUE]
Sets the base color to blue.
[YELLOW]
Sets the base color to yellow.
[CYAN]
Sets the base color to cyan.
[MAGENTA]
Sets the base color to magenta.
8) Press the <RETURN> or <MENU> button.
9) Press as to select [RED], [GREEN], or [BLUE].
10) Press qw to adjust the level.
Item Operation Adjustment Range of adjustment
[RED]
Press w.
Deepens red.
0 - +1024
(Factory default differs
depending on the [BASE
COLOR SETTING].)
Press q.
Weakens red.
[GREEN]
Press w.
Deepens green.
Press q.
Weakens green.
[BLUE]
Press w.
Deepens blue.
Press q.
Weakens blue.
Note
f If you set [BASE COLOR SETTING] to [NEUTRAL], [WHITE], [WARM WHITE], or [LIGHT], the setting is reected in the menu screen, but
the adjusted color setting is not reected in the menu screen.
f Adjust [COLOR SETTING] correctly. All colors will not be displayed properly unless adequate adjustment is made. If the adjustment does
not look suitable, you can press the <DEFAULT> button on the remote control to return the setting for only the selected item to the factory
default value.