Panasonic PT-LW373

44 - ENGLISH
button
1) Press the <LAMP> button on the remote control.
f It will switch each time you press the button, [ (Normal)] → [ (Eco 1)] →[ (Eco 2)].
Note
f For details, please refer to the [Setting] menu → [Lamp control] (x page 59).
Using the digital zoom function
(Only for still image-based computer (RGB) and still image-based HDMI signals input)
You can enlarge the center area. You can also change the location of the area to be enlarged.
buttons
1) Press the <D.ZOOM +> or < D.ZOOM -> button on the remote control.
f The [D. zoom] individual adjustment screen is displayed.
f Press asqw on the remote control to move the display position during zoom in.
[D.zoom] individual adjustment
screen
Operation Adjustment Adjustment range
Press the <D.ZOOM +> button. Increases magnication.
0 ~ 33
Press the <D.ZOOM -> button. Decreases magnication.
While the screen is displayed and
the image is expanded.
Press the as buttons.
Moves the area to the top or
the bottom.
-
Press the qw buttons.
Moves the area to the left or
the right.
Note
f When the input signals change during [D. zoom], the adjusted value of the digital zoom will be cancelled.
f When no signal input, the key operation is invalid and the icon will appear.
f You can also press asqw buttons on the control panel to move the display position during zoom in.
Controlling the volume of the speaker
You can adjust the volume of the audio output from the build-in speaker and the <VARIABLE AUDIO OUT> terminal.
buttons
1) Press the <VOLUME +> or <VOLUME -> button on the remote control.
<VOLUME +>
Increases the volume.
<VOLUME ->
Decreases the volume.
Switching the image mode
This function allows you to switch the image mode.
button
1) Press the <IMAGE> button on the remote control.
f It will switch each time you press the button, [Dynamic] → [Standard] →[Cinema] → [Blackboard(Green)] →
[Colorboard] → [User image] → [Dynamic] →....
Note
f For details, please refer to the [Color adjust] menu → [Image mode] (x page 55).
Chapter 3 Basic Operations - Basic operations by using the remote control