22 - ENGLISH
About your projector
Remote control
1
2
3
4
5
6
7
8
9
10
14
13
12
15
16
17
18
11
1 Power <v/b> button (v standby / b power on)
Sets the projector to the state where the projector is
switched o (standby mode). Also starts projection when
the power is switched o (standby mode).
2 Input selection buttons (<COMPUTER 1> /
<COMPUTER 2>*
1
/ <HDMI 1/2>*
2
/ <VIDEO> /
<MEMORY VIEWER/NETWORK>*
1
)
Switches the input signal to project. (x page 43)
*1 The <COMPUTER 2> button and <MEMORY VIEWER/
NETWORK> button are disabled for PT-LB306.
*2 The <HDMI 1/2> button only functions as HDMI input
selection button for PT-LB306.
3 <MENU> button / <RETURN> button / asqw buttons
/ <ENTER> button
Used to navigate through the menu screen. (x page 52)
The asqw buttons are also used to select characters in
the menu screen.
4 <FREEZE> button
Pauses the projected image and mute the audio
temporarily. (x page 47)
5 Number (<1> - <6>) buttons
Used for entering the ID number in a multiple projector
environment.
6 Remote control signal transmitter
Used to perform automatic adjustment while projecting the
image (x page 47).
8 <MUTE> button
Used to mute the audio. (x page 46)
Used to turn o the audio and video temporarily.
(x page 46)
10 <DAYLIGHT VIEW> button
Used to correct the image when the projector is used in a
bright surroundings.
(
x
pages 49, 58)
11 <DEFAULT> button
Resets the content of the sub-menu to the factory default.
(x page 53)
12 <ID SET> button
Sets the ID number of the remote control in a multi-projector
environment. (x page 49)
13 <D.ZOOM+> button / <D.ZOOM-> button
Zoom in and out the images. (x page 48)
14 <VOL +> button / <VOL -> button
Adjusts the volume of the built-in speaker or audio output.
(x page 46)
15 <FUNCTION> button
Species a shortcut button for a frequently used
operation. (x page 49)
16 <ID ALL> button
Used to simultaneously control all the projectors with
one remote control when using multiple projectors.
(x page 49)
Operates the P-timer function. (x page 48)
18 <SCREEN ADJ> button
Corrects the distortion of the projected image. (x page
47)
Chapter 1 Preparation - About your projector
To Next Page
Loading...
