Panasonic PT-MZ11K - Page 199

Chapter 5 Operations — Web control function
ENGLISH - 199
r Flow for setting
The ow for setting di󰀨ers depending on which certicate is to be used as the security certicate, either the server
certicate or the self-signed certicate.
Generate the CRT key.
Generate the self-signed certificate.Acquire the server certificate.
Generate the signing request.
Install the certificate.
Set the HTTPS port number.
Select the connection method.
Click [Set].
When using the server certificate When using the self-signed certificate
Note
f When using the server certicate, the procedure from application to the certication organization to issuing of the server certicate is
required to be performed between the customer and the certication organization. For the application method, etc., contact the certication
organization.
Generating the CRT key
Generate the CRT key used for encryption with the RSA (Rivest-Shamir-Adleman cryptosystem) public key
encryption method. CRT key is a type of the private key.
1) Click [Certificate] → [CRT Key generate] → [Execute].
f The page to generate the CRT key is displayed.
2) Click [Execute].
f When generating the CRT key for the rst time, the following message is displayed after the CRT is
generated. Proceed to Step 4).
“CRT key - Generated”
f When generating the CRT key for the second time or later, the following message is displayed.
“The CRT key will be generated. In updating the CRT key, the Server Certicate corresponds to the current
CRT key will become unavailable. Continue?”
3) Click [OK].
f CRT key will be generated and the following message will be displayed.
“CRT key - Generated”