Panasonic PT-MZ17K

Chapter 4 Settings — [DISPLAY OPTION] menu
120 - ENGLISH
[UNIFORMITY]
Correct the brightness unevenness and color unevenness of the entire screen.
1) Press as to select [UNIFORMITY].
2) Press qw to select an item.
f The items will switch each time you press the button.
[OFF] Does not correct the brightness unevenness and color unevenness of the entire screen.
[USER CORRECTION]
Corrects the brightness unevenness and color unevenness of the entire screen as desired.
For details, refer to “Setting [USER CORRECTION]” (x page 120).
[PC CORRECTION]
Corrects the brightness and color unevenness of the entire screen using a computer and “Geometric
& Setup Management Software”.
Note
f “Geometric & Setup Management Software” can be downloaded from the following website.
https://panasonic.net/cns/projector/pass/
It is necessary to register and login to PASS to download.
Setting [USER CORRECTION]
Correct the brightness unevenness and color unevenness of the entire screen as desired.
1) Press as to select [UNIFORMITY].
2) Press qw to select [USER CORRECTION], and press the <ENTER> button.
f The [UNIFORMITY:USER CORRECTION] screen is displayed.
3) Press as to select [ADJUSTMENT LEVEL].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[1] - [5]
Select the signal level (target brightness to adjust).
The entire screen becomes darker when the value gets larger.
f If you press w while the adjustment value is [5], the value will become [1]. If you press q while the
adjustment value is [1], the value will become [5].
5) Press as to select [TEST PATTERN].
6) Press qw to switch the item.
f The items will switch each time you press the button.
[ON] Displays the test pattern.
[OFF] Does not display the test pattern.
7) Press asqw to select [UPPER LEFT], [UPPER RIGHT], [LOWER LEFT], [LOWER RIGHT], [UPPER],
[LOWER], [LEFT], [RIGHT] or [ALL].
8) Press the <ENTER> button.
f The adjustment screen of [RED], [GREEN], or [BLUE] for the item selected in Step 7) is displayed.
9) Press as to select [RED], [GREEN], or [BLUE].
10) Press qw to adjust the level.
Item Operation Adjustment
[ADJUSTMENT LEVEL]:
Range of adjustment
[RED]
Press w.
Red becomes darker.
[1] - [4]:
- 127 - +127
[5]: 0 - +127
(Factory default setting: 0)
Press q.
Red becomes lighter.
[GREEN]
Press w.
Green becomes darker.
Press q.
Green becomes lighter.
[BLUE]
Press w.
Blue becomes darker.
Press q.
Blue becomes lighter.