Panasonic PT-MZ17K

Chapter 4 Settings — [NETWORK] menu
168 - ENGLISH
5) Press the <ENTER> button.
f The [KEY] screen is displayed.
6) Press asqw to select the text, and press the <ENTER> button to enter the text.
f The character string that can be registered as the connection key is as follows.
g 8 to 15 single-byte alphanumeric characters
7) After entering the connection key, press asqw to select [OK], and press the <ENTER> button.
8) Press as to select [STORE], and press the <ENTER> button.
f The conrmation screen is displayed.
9) Press qw to select [OK], and press the <ENTER> button.
Note
f The factory default setting of the connection key is “spjcxxxx”. xxxx is the four digit number assigned for each product.
[PROJECTOR NAME]
Change the projector name. Enter the host name if it is required to use a DHCP server.
1) Press as to select [PROJECTOR NAME].
2) Press the <ENTER> button.
f The [PROJECTOR NAME CHANGE] screen is displayed.
3) Press asqw to select the text, and press the <ENTER> button to enter the text.
f Up to 12 characters can be entered.
4) After entering the projector name, press asqw to select [OK] and press the <ENTER> button.
f To cancel, select [CANCEL].
Note
f The factory default setting of the projector name is “NAMExxxx”. xxxx is the four digit number assigned for each product.
[NETWORK STATUS]
Display the network information of the projector.
1) Press as to select [NETWORK STATUS].
2) Press the <ENTER> button.
f The [NETWORK STATUS] screen is displayed.
3) Press qw to switch the the display screen.
f The page will change each time you press the button.
[WIRED LAN (IPv4)] (page 1/5), [WIRED LAN (IPv6)] (page 2/5 and 3/5), [WIRELESS LAN] (page 4/5 and
5/5)
[WIRED LAN (IPv4)]
[DHCP] Displays the [DHCP] setting.
[IP ADDRESS] Displays the [IP ADDRESS].
[SUBNET MASK] Displays the [SUBNET MASK].
[DEFAULT GATEWAY] Displays the [DEFAULT GATEWAY].
[DNS1] Displays the address of the preferred DNS server.
[DNS2] Displays the address of the alternate DNS server.
[MAC ADDRESS] Displays the [MAC ADDRESS] of wired LAN.
[WIRED LAN (IPv6)]
[AUTO CONFIGURATION] Displays the [AUTO CONFIGURATION] setting.
[LINK LOCAL ADDRESS] Displays [LINK LOCAL ADDRESS] and [PREFIX LENGTH].
[STATEFUL ADDRESS] Displays [STATEFUL ADDRESS] and [PREFIX LENGTH].
[STATELESS ADDRESS] Displays [STATELESS ADDRESS] and [PREFIX LENGTH].
[TEMPORARY ADDRESS] Displays [TEMPORARY ADDRESS] and [PREFIX LENGTH].
[IP ADDRESS] Displays [IP ADDRESS] and [PREFIX LENGTH].
[DEFAULT GATEWAY] Displays the [DEFAULT GATEWAY].
[DNS1] Displays the address of the preferred DNS server.
[DNS2] Displays the address of the alternate DNS server
[MAC ADDRESS] Displays the [MAC ADDRESS] of wired LAN.