Chapter 4 Settings — [NETWORK] menu
176 - ENGLISH
6) Press as to select the channel to set, and press qw to switch the item.
[LIGHT OUTPUT] Adjusts the brightness of light source.
[INPUT SELECT] Switches the input.
[LENS POSITION] Moves the lens position.
[LENS H SHIFT] Adjusts the lens shift in the horizontal direction.
[LENS V SHIFT] Adjusts the lens shift in the vertical direction.
[LENS FOCUS] Adjusts the focus.
[LENS ZOOM] Adjusts the zoom.
[POWER] Controls the power status.
[SHUTTER] Controls the shutter.
[FADE-IN] Sets the fade-in time.
[FADE-OUT] Sets the fade-out time.
[GEOMETRY] Performs geometric adjustment.
[CUSTOM MASKING] Performs geometric adjustment using a computer.
[FREEZE] Freezes the projected image.
[COLOR] Adjusts the color saturation.
[TINT] Adjusts the tint.
[RASTER PATTERN] Displays the raster pattern.
[ENABLE / DISABLE] Enables/disables the control of the projector with the Art-Net function.
[NONE] No denition
f The setting can be also made by pressing as to select the channel, pressing the <ENTER> button to
display the item list, pressing asqw to select the item, and pressing the <ENTER> button.
f Same item cannot be set for multiple channels, except for [NONE].
[Art-Net STATUS]
Display the content of control assigned to each channel and the received data of that channel.
1) Press as to select [Art-Net].
2) Press the <ENTER> button.
f The [Art-Net] screen is displayed.
3) Press as to select [Art-Net STATUS].
4) Press the <ENTER> button.
f The [Art-Net STATUS] screen is displayed.
To Next Page
Loading...
