Chapter 5 Operations — Using the information monitor function
224 - ENGLISH
Error notication mode
The error/warning symbol is displayed in the information monitor as a self-diagnosis information when an error or
warning has occurred in the projector.
For details on content of the error/warning symbols, refer to “[SELF TEST] indications” (x page 247).
Operation procedure when an error/warning has occurred
This section explains using the case when the intake air temperature warning is detected in the self-diagnosis as
an example.
U200
［TEMP.］
1) Press the <INFO> button on the control panel.
f The screen of the menu operation mode → [STATUS] menu → [PROJECTOR] → [SELF TEST] is
displayed.
WARNING
SELF TEST
2) Press the <ENTER> button.
f The self-diagnosis information is displayed as the error/warning symbol.
U200
［TEMP.］
3) Press w.
f The detailed information is displayed.
Intake air temp.
warning
f Press the <INFO> button on the control panel to return to the [SELF TEST] screen in Step 2).
To Next Page
Loading...
