Panasonic PT-MZ780

Chapter 4 Settings — [DISPLAY OPTION] menu
104 - ENGLISH
9) Press
qw
to select [OK], and press the <ENTER> button.
Note
f
To initialize all settings in [USER CORRECTION] in one time, select [PROJECTOR SETUP] menu → [INITIALIZE] → [ALL USER DATA] or
[UNIFORMITY] and execute the initialization.
f
[TEST PATTERN] is not initialized.
Setting [ZOOM CORRECTION]
Color unevenness may change depending on the zoom position of the lens. Change the setting according to the
zoom position so that color unevenness is minimized.
1) Press
as
to select [UNIFORMITY].
2) Press the <ENTER> button.
f
The
[UNIFORMITY]
screen is displayed.
3) Press
as
to select [ZOOM CORRECTION].
4) Press
qw
to adjust the zoom correction.
f
The items will switch each time you press the button.
[0]
Select [0] when the lens is at the wide end (W) for the best color unevenness correction.
[1] - [7]
Select from [1] to [7] for the best color unevenness correction.
[8]
Select [8] when the lens is at the tele end (T) for the best color unevenness correction.
[SHUTTER SETTING]
Set the operation of the shutter function.
Setting [FADE-IN] or [FADE-OUT]
1) Press
as
to select [SHUTTER SETTING].
2) Press the <ENTER> button.
f
The
[SHUTTER SETTING]
screen is displayed.
3) Press
as
to select [FADE-IN] or [FADE-OUT].
4) Press
qw
to switch the item.
Item Adjustment
[FADE-IN]
[FADE-OUT]
[OFF]
Does not set fade-in or fade-out.
[0.5s] - [10.0s]
Sets the fade-in or fade-out time.
Select an item from [0.5s] - [4.0s], [5.0s], [7.0s], or [10.0s]. [0.5s] -
[4.0s] can be selected in increments of 0.5.
Note
f
If the <SHUTTER> button on the remote control is pressed during fade-in or fade-out, the fade operation is canceled.
f
Fade-in/fade-out is not performed on the audio. Audio is output or paused linked to the operation of the shutter function.
Setting [STARTUP]
Automatically enable/disable the shutter function (shutter: closed/open) when the power is turned on.
1) Press
as
to select [SHUTTER SETTING].
2) Press the <ENTER> button.
f
The
[SHUTTER SETTING]
screen is displayed.
3) Press
as
to select [STARTUP].
4) Press
qw
to switch the item.