Panasonic PT-MZ780

Chapter 3 Basic Operations — Operating with the remote control
68 - ENGLISH
Using the status function
Display the status of the projector.
button
1) Press the <STATUS> button.
f
The
[STATUS]
screen is displayed.
1/3
RETURN
EXITCHANGE
ENTER
SEND E-MAIL
SELF TEST
NO ERRORS
LIGHT TEMP. 2
LIGHT TEMP. 1
EXHAUST AIR TEMP.
INTAKE AIR TEMP.
MAIN/SUB VERSION
LIGHT RUNTIME
CONTINUOUS LIGHTING TIME
SERIAL NUMBER
PROJECTOR RUNTIME
PROJECTOR TYPE
STATUS
SW1234567
10h
10h
1h 23m
1.00 / 1.00
31°C/87°F
31°C/87°F
31°C/87°F
31°C/87°F
PT-MZ880
Note
f
The projector status can also be displayed using the menu operation. Refer to the [PROJECTOR SETUP] menu
→
[STATUS] (
x
page 121)
for details.
Using the ECO management function
Display the setting screen relating to ECO management.
button
1) Press the <ECO> button.
Note
f
Refer to the [PROJECTOR SETUP] menu
→
[ECO MANAGEMENT] (
x
page 108) for details.
Using the HDMI-CEC function
Display the HDMI-CEC operation screen.
button
1) Press the <CEC> button.
f
The HDMI-CEC operation screen is displayed.
Note
f
Refer to [PROJECTOR SETUP] menu → [HDMI CEC] (
x
page 123) for details.
f
Pressing the <CEC> button during digital zoom will cancel the digital zoom adjustment.