Chapter 4 Settings — [PICTURE] menu
88 - ENGLISH
Terminal System format
<RGB 1 IN> terminal, <RGB 2
IN> terminal
480/60i, 576/50i, or 576/50p
signal
Select [RGB] or [YC
B
C
R
].
640 x 480/60 or 480/60p
signal
Select an item from [640x480/60], [480/60p YC
B
C
R
], or [480/60p
RGB].
Other moving image signals Select [RGB] or [YP
B
P
R
].
<DVI-D IN> terminal
480/60i, 576/50i, 480/60p, or
576/50p signal
Select [RGB] or [YC
B
C
R
].
Other moving image signals Select [RGB] or [YP
B
P
R
].
<HDMI IN> terminal, <DIGITAL
LINK/LAN> terminal
480/60i, 576/50i, 480/60p, or
576/50p signal
Select [AUTO], [RGB], or [YC
B
C
R
].
Other moving image signals Select [AUTO], [RGB], or [YP
B
P
R
].
<SDI IN> terminal
Select an item from [AUTO], [480/60i YC
B
C
R
], [576/50i YC
B
C
R
], [720/50p YP
B
P
R
], [720/60p YP
B
P
R
],
[1080/24p YP
B
P
R
], [1080/24sF YP
B
P
R
], [1080/25p YP
B
P
R
], [1080/30p YP
B
P
R
], [1080/50i YP
B
P
R
],
[1080/60i YP
B
P
R
], [1080/50p YP
B
P
R
], [1080/60p YP
B
P
R
], [1080/24p RGB], [1080/24sF RGB],
[1080/25p RGB], [1080/30p RGB], [1080/50i RGB], [1080/60i RGB], [2K/24p RGB], [2K/25p RGB],
[2K/30p RGB], [2K/48p YP
B
P
R
], [2K/50p YP
B
P
R
], or [2K/60p YP
B
P
R
].
4) Press the <ENTER> button.
Note
f For details of the types of video signals that can be used with the projector, refer to “List of compatible signals” (x page 200).
f This may not function properly for some connected external devices.
sRGB-compliant video
sRGB is an international standard (IEC61966-2-1) for color reproduction dened by IEC (International
Electrotechnical Commission).
Set according to the following steps to reproduce more faithful, sRGB compliant colors.
1) Set [COLOR MATCHING] to [OFF].
f Refer to [COLOR MATCHING] (x page 100).
2) Display the [PICTURE] menu.
f Refer to “[PICTURE] menu” (x page 81).
3) Press as to select [PICTURE MODE].
4) Press qw to set [NATURAL].
5) Press as to select [COLOR].
6) Press the <DEFAULT> button on the remote control to set the factory default setting.
7) Follow Steps 5) - 6) to set [TINT], [COLOR TEMPERATURE], [WHITE GAIN], [GAMMA], and [SYSTEM
DAYLIGHT VIEW] to the factory default settings.
Note
f sRGB is available for RGB signal input only.
To Next Page
Loading...
