-34-
Optical Adjustments
Relay lens (OUT) adjustment
1 Turn the projector on by a state of without FPC cables.
2 Project all of lights on the screen.
3 Adjust the adjustment base of relay lens (OUT) assy to make color unifor-
mity in white.
If the shading appears on the left or right of the screen as shown in Fig.3,
loosen 1 screw G by using a hex screwdriver, and adjust the slot H to
make color uniformity in white by using a slot screwdriver.
4 Tighten the screw G to fix the relay lens (OUT) assy.
White
G
H
Fig.3
Moving of slot H
To Next Page
Loading...
