Disassembly / Replaced parts
LCD/
prism assy
Condenser
lens (OUT)
Relay
lens (OUT)
Polarized glass
Power
board
Main
board
R G B
Optical adjustments
Optical center adjustment
● ● ●
Condenser lens(OUT) adjustment
❍ ●
Relay lens(OUT) adjustment
❍ ●
Electrical Adjustments
Fan voltage adjustment
● ●
Panel type check and setting
❍ ●
Auto calibration adjustment [PC]
❍
Auto calibration adjustment [Component]
❍
Auto calibration adjustment [Video]
❍
Common center adjustment
● ●
50% white adjustment [PC]
● ●
Gamma correction adjustment
❍ ❍
White balance adjustment [PC]
❍ ❍ ❍ ❍ ❍
Color shading correction adjustment *
❍ ❍ ❍ ❍ ❍
*
To setup or adjust those items, the Projector Service Tool v. 4.20 software is needed. Refer to the owner's
manual for this software for the further details.
● : Adjustment necessary ❍ : Check necessary
Adjustments after parts replacement
Adjustments
To Next Page
Loading...
